Specification:

• Model:430379
• Power: 27W
• LED quantity: 9pcs
• Materail of lamp: Titantic Aluminum Alloy
• Lumen: 1800LM
• Color option: RGB changable
• Color: RGB 16 Colors
• Working Voltage: 12/24V DC
• Beam Angle: 180°
• Size: Like the picture show
• Cable Length: approx. 189cm

• - Single LED 3W with 9pcs LED insides ,total 27W super brightness.
• - Make of Titanic Aluminum Alloy housing materials, anti-corrosion.
• - easy installation, no drilling hole are needed, just screw it into the holes on your boat.
• - Install for both small or large boat with DC8-28V built-in driver.
• - Low power consumption, energy saving, environmental protection.

• Light are for underwater use only!
• Professional installation is recommended.
• 1.5A (For 27W model) fuse must be used on all positive connections.
• Color changing function works only with color controller.
• Do not operate the light above water for more than 5 minutes.

• 1. Loosen the drain plug.
• 2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting. The garboard fitting is 1/2″ NPT . (Or your special customized thread).
• 3. Connect to a 12V DC or 24V DC on/off switch after wiring the driver box and Remote Control. Please see wiring instruction.
• 4. Switch on the power and press the "on/off" button on remote controller, then change to different modes th check if it works well.

• - There is a corrosin resistant coating on surface, to avoid the damage of surface and corrosion performmance, do not use wrench for installation and do not scratch the surface with hard stuffs.
• - The light must be test on DC 12-24V.
• - If text in air, the light will turn off automatically after several minutes. This is because the Overheat Protection Circuit work. It will recover to work after the inside temperature is lower than 60 degree.
• - Do not rotate the wire outlet joint or shake the wire strongly at installation. This may damage to the inside circuit and cause the light doesn't work well

Prodcut pictures for  Led Marine Lamp 27W Boat Drain Plug Light 9 LED Boat Light Underwater Boat Lamp

Green Lantern Optoelectrical Light Factory  Profile:

1) We are a large LED lighting manufacturer for 12 years

2) We founded in 2005 and already established 3 factories and 1 trading company

3) We specialize in producing LED lights, such as Smart led bulb,Milight serious,LED Rope Lights, Rope Lights, LED Panel light,LED Controller,LED tube,LED downlight..

4) We focus on Quality manufacture our lights in accordance with CE,GS, RoHS ,SAA ,TUV certification

5) We meet and exceed global quality standards

6) We now ship well over half of our output to countries and regions worldwide

1.Reply your inquiry in 12 hrs
2.Any professional question would get a professional answer.
3.ODM/OEM is accept.
4.All products offer CE&ROHS&FCC Approved,2 years warranty.
5.Product damaged in non-human factors would be replaced freely.

1.How could I trust you?
We are Alibaba gold supplier,registered in administration,supervised by Alibaba rule and Chinese law.
2.How about your company ability?
We have 2 professional production line,4 sets Yamaha chip mounter,50-100 workers,
We can offer 50,000 pcs tubes,100,000pcs bulbs per month at least.
3.How about payment?
We accept payment as below:
T/T:Bank transfer,30% deposit,70% balance before shipping for order >20,000USD
West Union:Fast,low charge
L/C:Only for order >50,000USD
Alibaba Escrow:Protected by Alibaba
Paypal:Good way for sample order